Refine
Document Type
- Working Paper (13)
- Report (8)
- Article (7)
- Preprint (3)
Has Fulltext
- yes (31)
Keywords
- Optimization (9)
- Optimierung (6)
- Benchmarking (3)
- Modeling (3)
- 3D Printing (2)
- Combined simulation (2)
- Evolutionary Computation (2)
- Evolutionärer Algorithmus (2)
- Globale Optimierung (2)
- Machine Learning (2)
Institute
- Fakultät für Informatik und Ingenieurwissenschaften (F10) (31) (remove)
We propose a hybridization approach called Regularized-Surrogate- Optimization (RSO) aimed at overcoming difficulties related to high- dimensionality. It combines standard Kriging-based SMBO with regularization techniques. The employed regularization methods use the least absolute shrinkage and selection operator (LASSO). An extensive study is performed on a set of artificial test functions and two real-world applications: the electrostatic precipitator problem and a multilayered composite design problem. Experiments reveal that RSO requires significantly less time than Kriging to obtain comparable results. The pros and cons of the RSO approach are discussed and recommendations for practitioners are presented.
Forschendes Lernen versteht sich als ein methodisches Prinzip, das Forschungsorientierung und Verknüpfung von Forschung und Lehre in die Studiengänge und Lehrveranstaltungen integriert und für studentische Lernprozesse nutzbringend anwendet. Studierende sind dabei Teil der Scientific Community.
Dieser Artikel ist ein Erfahrungsbericht, in dem das Konzept des „Forschenden Lernens“ in einer Variante vorgestellt wird, die in den letzten zehn Jahren an einer deutschen Fachhochschule für ingenieurwissenschaftliche Studiengänge entwickelt wurde.
Da es „das“ Forschende Lernen nicht gibt, werden zunächst die für diesen Artikel relevanten Gesichtspunkte zusammengestellt. Darauf aufbauend wird ein Prozessmodell des Forschenden Lernens vorgestellt. Dieses Modell ermöglicht Forschendes Lernen für Bachelor- und Masterstudierende sowie für Doktorandinnen und Doktoranden.
When researchers and practitioners in the field of
computational intelligence are confronted with real-world
problems, the question arises which method is the best to
apply. Nowadays, there are several, well established test
suites and well known artificial benchmark functions
available.
However, relevance and applicability of these methods to
real-world problems remains an open question in many
situations. Furthermore, the generalizability of these
methods cannot be taken for granted.
This paper describes a data-driven approach for the
generation of test instances, which is based on
real-world data. The test instance generation uses
data-preprocessing, feature extraction, modeling, and
parameterization. We apply this methodology on a classical
design of experiment real-world project and generate test
instances for benchmarking, e.g. design methods, surrogate
techniques, and optimization algorithms. While most
available results of methods applied on real-world
problems lack availability of the data for comparison,
our future goal is to create a toolbox covering multiple
data sets of real-world projects to provide a test
function generator to the research community.
The performance of optimization algorithms relies crucially on their parameterizations. Finding good parameter settings is called algorithm tuning. Using
a simple simulated annealing algorithm, we will demonstrate how optimization algorithms can be tuned using the Sequential Parameter Optimization Toolbox (SPOT). SPOT provides several tools for automated and interactive tuning. The underlying concepts of the SPOT approach are explained. This includes key techniques such as exploratory fitness landscape analysis and response surface methodology. Many examples illustrate
how SPOT can be used for understanding the performance of algorithms and gaining insight into algorithm behavior. Furthermore, we demonstrate how SPOT can be used as an optimizer and how a sophisticated ensemble approach is able to combine several meta models via stacking.
Ziel des Forschungsprojektes "Mehrkriterielle CI-basierte Optimierungsverfahren für den industriellen Einsatz" (MCIOP) war die Verringerung von Schadstoffemissionen in Kohlekraftwerken. Der wissenschaftliche Fokus lag auf der Entwicklung von Methoden, die in der Lage sind, interpretierbare Modelle für die Schadstoffemissionen automatisch zu generieren. Hierzu wurden mehrkriterielle Optimierungsverfahren entwickelt und eingesetzt. Zur Zeit- und Kostenreduktion wurde die Optimierung durch Surrogat-Modelle erfolgen, die abgestuft mit aufwändigeren Simulationen zum Einsatz kamen („optimization via simulation“). Bei der Untersuchung von Staubabscheidern konnten durch eine mehrkriterielle Optimierung unterschiedliche Zielgrößen, wie z.B. Abscheidegrad und Druckverlust, gleichzeitig berücksichtigt werden.
Dieser Bericht beschreibt die im Projekt MCIOP im Zeitraum von August 2011 bis einschließlich Juni 2015 erzielten Ergebnisse.
To maximize the throughput of a hot rolling mill,
the number of passes has to be reduced. This can be achieved by maximizing the thickness reduction in each pass. For this purpose, exact predictions of roll force and torque are required. Hence, the predictive models that describe the physical behavior of the product have to be accurate and cover a wide range of different materials.
Due to market requirements a lot of new materials are tested and rolled. If these materials are chosen to be rolled more often, a suitable flow curve has to be established. It is not reasonable to determine those flow curves in laboratory, because of costs and time. A strong demand for quick parameter determination and the optimization of flow curve parameter with minimum costs is the logical consequence. Therefore parameter estimation and the optimization with real data, which were collected during previous runs, is a promising idea. Producers benefit from this data-driven approach and receive a huge gain in flexibility when rolling new
materials, optimizing current production, and increasing quality. This concept would also allow to optimize flow curve parameters, which have already been treated by standard methods. In this article, a new data-driven approach for predicting the physical behavior of the product and setting important parameters is presented.
We demonstrate how the prediction quality of the roll force and roll torque can be optimized sustainably. This offers the opportunity to continuously increase the workload in each pass to the theoretical maximum while product quality and process stability can also be improved.
The use of surrogate models is a standard method to deal with complex, realworld
optimization problems. The first surrogate models were applied to continuous
optimization problems. In recent years, surrogate models gained importance
for discrete optimization problems. This article, which consists of three
parts, takes care of this development. The first part presents a survey of modelbased
methods, focusing on continuous optimization. It introduces a taxonomy,
which is useful as a guideline for selecting adequate model-based optimization
tools. The second part provides details for the case of discrete optimization
problems. Here, six strategies for dealing with discrete data structures are introduced.
A new approach for combining surrogate information via stacking
is proposed in the third part. The implementation of this approach will be
available in the open source R package SPOT2. The article concludes with a
discussion of recent developments and challenges in both application domains.
In this paper we present a comparison of different data driven modeling methods. The first instance of a data driven linear Bayesian model is compared with several linear regression models, a Kriging model and a genetic programming model.
The models are build on industrial data for the development of a robust gas sensor.
The data contain limited amount of samples and a high variance.
The mean square error of the models implemented in a test dataset is used as the comparison strategy.
The results indicate that standard linear regression approaches as well as Kriging and GP show good results,
whereas the Bayesian approach, despite the fact that it requires additional resources, does not lead to improved results.
Modelling Zero-inflated Rainfall Data through the Use of Gaussian Process and Bayesian Regression
(2018)
Rainfall is a key parameter for understanding the water cycle. An accurate rainfall measurement is vital in the development of hydrological models. By means of indirect measurement, satellites can nowadays estimate the rainfall around the world. However, these measurements are not always accurate. As a first approach to generate a bias-corrected rainfall estimate using satellite data, the performance of Gaussian process and Bayesian regression is studied. The results show Gaussian process as the better option for this dataset but leave place to improvements on both modelling strategies.
Cyclone separators are popular devices used to filter dust from the emitted flue gases. They are applied as pre-filters in many industrial processes including energy production and grain processing facilities.
Increasing computational power and the availability of 3D printers provide new tools for the combination of modeling and experimentation, which necessary for constructing efficient cyclones. Several simulation tools can be run in parallel, e.g., long running CFD simulations can be accompanied by experiments with 3D printers. Furthermore, results from analytical and data-driven models can be incorporated. There are fundamental differences between these modeling approaches: some models, e.g., analytical models, use domain knowledge, whereas data-driven models do not require any information about the underlying processes.
At the same time, data-driven models require input and output data, whereas analytical models do not. Combining results from models with different input-output structure is of great interest. This combination inspired the development of a new methodology. An optimization via multimodel simulation approach, which combines results from different models, is introduced.
Using cyclonic dust separators (cyclones) as a real-world simulation problem, the feasibility of this approach is demonstrated. Pros and cons of this approach are discussed and experiences from the experiments are presented.
Furthermore, technical problems, which are related to 3D-printing approaches, are discussed.